Drivers - Controlador USB RS-232 (Funciona)

Drivers – Controlador USB RS-232 (Funciona)

Drivers – Controlador USB RS-232 (Funciona)

Drivers - Controlador USB RS-232 (Funciona)
Drivers – Controlador USB RS-232 (Funciona)

Windows 10, 8.1, 8, 7, Vista 64-bit & 32bit, Windows XP, Windows 2000, Windows Me, Windows 98
Important note regarding Windows 10/8.1/8/7 & Vista:

The driver MUST be installed «as Administrator»
Right-click the USB RS-232 2016 Downloaded EXE file and choose Run as administrator

USB RS-232 2016 Download the Windows installer for the USB RS-232 2016 adapter:
USB RS-232 2016 Download for Windows 10/8.1/8/7/Vista/XP (32-bit)
USB RS-232 2016 Download for Windows 10/8.1/8/7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
USB RS-232 2016 Download for Windows 7/Vista/XP (32-bit and 64-bit – Alternate driver)
USB RS-232 2016 Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
USB RS-232 2016 Download for Windows 8/7/Vista/XP (32-bit and 64-bit)
USB RS-232 2016 Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation
1) Open the Device Manager dialog from Control Panel
Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager

2) Click the plus sign (+) next to «Ports».

3) If the device is properly installed, «Serialio.com USB Serial Port» or «Prolific USB-to-Serial COM Port» will be displayed.
The software driver is properly installed, but the USB-RS232 2016 adapter does not work as expected
One of the common reasons that software may not work as expected with a USB-Serial adapter when the device is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 – COM4)

If the USB-RS232 2016 adapter is installed as COM5, it may need to be reassigned to COM1 – COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE Windows XP

1) Follow steps 1-3 of «Check the software driver installation» above.
2) Right-click on the «Prolific USB to Serial Port», then click Properties
3) Click on the «Port Settings» tab. Click the «Advanced» button.
4) In the «COM Port Number» drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have «(in use)» listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click «OK.»
5) Click «OK» again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.
6) Close the Device Manager. Launch the software to use with the new COM port.

Windows 2000, Me, and 98 SE (Second Edition)
1) Follow steps 1 2 of «Check the software driver installation» above.
2) Right-click on the «Prolific USB to Serial Port», then click Properties.
3) Click on the «Port Settings» tab. Click the «Advanced» button.
4) Uncheck «Use automatic settings».
5) Select «Input/Output range». Click on «Change Settings».
6) Type «02E8-02EF» in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

usb rs232 adapter, usb rs232 adapter driver, usb rs232 adapter cable, usb rs232 adapter voltage levels, usb rs232 adaptor, usb rs232 adapter windows 10, usb rs232 adapter pinout, rs232 to usb adapter, usb to serial rs232 adapter, bluetooth/usb/rs232, rs232 to usb converter, usb to rs232, trendnet usb to rs232 serial converter tu-s9, usb to serial rs232 db9 adapter cable, usb to rs232 db9 serial adapter, usb rs-232 emulation driver windows 7, usb serial rs 232 driver, usb rs232 serial adapter driver, cdc rs-232 emulation demo usb driver, external usb-to-rs232 converter, usb to rs232 ftdi driver, gearmo® usb rs232 serial adapter, gearmo usb to rs232 converter, usb otg uart rs232 hyperterminal tester for android, usb to rs232 hub, jual rs232 to usb, rs232 to mini usb, usb rs-232 serial adapter db-9 male, rs232 to usb pinout, usb to rs-232 port,

  1. COM 1: 03F8-03FF
  2. COM 2: 02F8-02FF
  3. COM 3: 03E8-03EF
  4. COM 4: 02E8-02EF

7) Enter the value, then click OK. Click OK again, then click Yes when the «Creating a Forced Configuration» window appears. Click OK.

8) Restart the computer. The Device Manager can be checked, to see the COM port change.
Note: Adapter may not be exactly as pictured above.

Drivers – Controlador USB RS-232 (Funciona) Descargar Aqui<<<

IMPORTANTE Para actualizar su Deco

  • Descargar los Archivos y Descomprimir.
  • Insertar la actualización en un Pendrive 
  • Recuerde reiniciar su Deco
  • Quitar todas las conexiones de red, antena, cable usb,
  • Colocar el Pendrivers en su Decodificador y actualizar
  • Recuerde que al finalizar la actualización debe reiniciar el deco.
  • Cualquier duda . recuerde preguntar.

Atención
Recordar que las Actualizaciones la mayoría están en formato rar, y debe usar WinRar.

Les recuerdo a nuestros usuarios, que los archivos publicados aquí. Son sacados de internet Y queda de su responsabilidad el uso de dichos archivos.. gracias por su comprensión. alguna duda dejar su mensaje.